View JWD-107-1_245993.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
Catalog 1308242 Issued 3-03
P&B
JWD/JWS series
Features
* * * * * JWD has dual in-line package (DIP) configuration. (14-pin DIP) JWS has single in-line package (SIP) configuration. Low cost, dry reed reliability with various contact arrangements. Wave solderable and immersion cleanable. Optional coil suppression diode.
Dual In-Line Package & Single In-Line Package Dry Reed Relays
File E29244 File LR81479
Wiring Dia. No. 1 1 1 1 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 7 7 7 7 7 7 7 7
Ordering Information - Boldface items are more likely to be stocked.
Nom. ResisMust Must Max. Nom. Relay Volttance Operate Release Volt- Coil 10% Voltage Voltage age Power Part Diode age No. (VDC) (Ohms) (VDC) (VDC) (VDC) (mW) JWD (DIP units) with 1 Form A (SPST-NO) contacts rated 10W max. JWD-107-1 No 5/6 500 3.8 0.5 19 50/72 JWD-107-5 Yes 5/6 500 3.8 0.5 19 50/72 JWD-107-3 No 12 1,200 9.6 1.0 19 120 JWD-107-7 Yes 12 1,200 9.6 1.0 19 120 JWD-171-5 No 24 2,150 19.2 2.0 40 268 JWD-171-10 Yes 24 2,150 19.2 2.0 40 268 JWD (DIP units) with 2 Form A (DPST-NO) contacts rated 10W max. JWD-171-21 No 5/6 200 3.8 0.5 14 125/180 JWD-171-25 Yes 5/6 200 3.8 0.5 14 125/180 JWD-171-23 No 12 500 9.6 1.0 19 288 JWD-171-27 Yes 12 500 9.6 1.0 19 288 JWD-171-24 No 24 2,200 19.2 2.0 40 262 JWD-171-28 Yes 24 2,200 19.2 2.0 40 262 JWD (DIP units) with 1 Form B (SPST-NC) contacts rated 10W max. JWD-171-12 No 5/6 500 3.8 0.5 7 50/72 JWD-171-17 Yes 5/6 500 3.8 0.5 7 50/72 JWD-171-14 No 12 1,200 9.6 1.0 16 120 JWD-171-19 Yes 12 1,200 9.6 1.0 16 120 JWD-171-15 No 24 2,200 19.2 2.0 40 262 JWD-171-20 Yes 24 2,200 19.2 2.0 40 262 JWD (DIP units) with 1 Form C (SPDT) contacts rated 3W max. JWD-172-1 No 5/6 200 3.8 0.5 12 125/180 JWD-172-5 Yes 5/6 200 3.8 0.5 12 125/180 JWD-172-3 No 12 500 9.6 1.0 19 288 JWD-172-7 Yes 12 500 9.6 1.0 19 288 JWD-172-4 No 24 2,200 19.2 2.0 38 262 JWD-172-8 Yes 24 2,200 19.2 2.0 38 262 JWD-172-155 No 5/6 200 3.8 0.5 12 125/180 JWD-172-159 Yes 5/6 200 3.8 0.5 12 125/180 JWD-172-157 No 12 1,000 9.6 1.0 19 144 JWD-172-161 Yes 12 1,000 9.6 1.0 19 144 JWD-172-158 No 24 2,150 19.2 2.0 38 268 JWD-172-162 Yes 24 2,150 19.2 2.0 38 268 JWS (SIP units) with 1 Form A (SPST-NO) contacts rated 10W max. JWS-117-1 JWS-117-6 JWS-117-3 JWS-117-8 JWS-117-13 JWS-117-18 JWS-117-5 JWS-117-10 No Yes No Yes No Yes No Yes 5 5 12 12 12 12 24 24 500 500 530 530 1,850 1,850 2,150 2,150 3.8 3.8 9.6 9.6 9.6 9.6 19.2 19.2 0.5 0.5 1.0 1.0 1.0 1.0 2.0 2.0 16 16 19 19 30 30 36 36 50 50 272 272 78 78 268 268
Contact Data @ 25C
Arrangements: 1 Form A (SPST - NO) on JWD & JWS. 1 Form B (SPST - NC), 1 Form C (SPDT) and 2 Form A (DPST-NO) on JWD only. Material: Ruthenium. Expected Mechanical Life: 100 million operations. Expected Electrical Life:
Forms A & B Resistive Load End of Life Criteria No. of Operations 20VDC, 500mA 500mV Loss 1 x 106 20VDC, 250mA 500mV Loss 20 x 106 Low Level (5VDC, 1mA) 50 Ohms 100 x 106 12VDC, 500mA 500mV Loss 1 x 106 10VDC, 10mA 50 Ohms 25 x 106 Low Level (5VDC, 1mA) 50 Ohms 100 x 106
Form C
Contact Ratings: Maximum Switched Voltage: 100VDC for Forms A & B; 28VDC for Form C. Maximum Switched Current: 500mA for all models. Maximum Switched Power:10W for Forms A & B; 3W for Form C. Initial Contact Resistance: 200 milliohms, max. at 10mA, 6VDC.
Initial Dielectric Strength
Between Open Contacts: 250VDC for Forms A & B; 175VDC for Form C. Between Contacts and Coil: 500VDC.
Initial Insulation resistance
Between Mutually Insulated Conductors: 1010 ohms at 100VDC.
Coil Data @ 25C
See Ordering Information table.
Operate Data @ 25C
Operate Time (Including Bounce): 1.5 ms, max. Release Time (Including Bounce): 0.5 ms, max., for Forms A & B; 3.0 ms, max., for Form C.
At or from Nominal Coil Voltage.
Environmental Data
Temperature Range: -35C to +85C. Shock: 100 g, max., in three planes for 8 ms, 1/2 wave pulse. Vibration: 20 g, max., between 10 and 2,000 Hz.
Outline Dimensions
JWD
.125 .010 (3.18 .254) .770 MAX. (19.56) .300 MAX. (7 .62)
Mechanical Data
Termination: Printed circuit terminals on 0.100" (2.54mm) grid centers. Enclosure Type: Black molded epoxy package. Weight: 0.08 oz. (2.3g) approximately.
12
67
Wiring Diagrams (Top Views)
Dia. 1
76
w
.315 (8.0) MAX. WITH TERMINALS VERTICAL
Dia. 2
+2 1 76
w
w
Dia. 3
+2 1 76
w
w
Dia. 4
+2 1 76
w
+2 1
.100 TYP . (2.54) .600 (15.24)
.020 TYP . (.51) 4 MAX. TYP . .012 TYP . (.3)
MAGNET
89
13 14
89
13 14
89
13 14
89
Dia. 5
76
w
w w
Dia. 6
+2 1 76
w
w
Dia. 7
+2 1
w
89
13 14
89
1314
1
+3
5
7
Note: Terminal numbers are for reference only and do not appear on relays.
Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.
Dimensions are shown for reference purposes only.
Dimensions are in inches over (millimeters) unless otherwise specified.
w
w
w
w
13 14
JWS
.800 MAX. (20.32)
.260 MAX. (6.6)
.307 MAX. (7 .8) 1 .020 TYP . (.51) 3 5 7 .018 TYP . (.46) .200 TYP . (5.08)
Note:
w
.010 TYP . (.25) .125 .010 (3.18 .254)
Magnetic shielding may be required between relays when they are placed in very close proximity to one another.
Specifications and availability subject to change.
www.tycoelectronics.com Technical support: 303 Refer to inside back cover.

▲Up To Search▲

Price & Availability of JWD-107-1

	To Download JWD-107-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .